Our Catalogue
Brands

COVE ROUTER BIT WITH BEARING 1/2'X1/2'

COVE ROUTER BIT WITH BEARING 1/2'X1/2'
COVE ROUTER BIT WITH BEARING 1/2'X1/2' COVE ROUTER BIT WITH BEARING 1/2'X1/2'
Brand: TORK CRAFT
Product Code: CKP1005
Availability: 160
Price: R119.86
Ex Tax: R104.23
Qty:     - OR -   Add to Wish List
Add to Compare
Cove Router Bit

CKP1005Thisis an affordable router bit range that is well supported throughout South Africa. Allour Tork Craft router bits are Tungsten tipped. Tork Craft is a well-known BRANDin most retail stores.

At a glance:

½" Ø Shank router bit with a 7,9 mm (5/16") radius to profilea cove shape in wood.

Application:

This router bit is used with a plunge router to profile the edge of wood to producea concave edge that has a 7,9 mm (5/16") radius.

Definition: Cove Router Bits combine one or more concave radii (cove) toform many unique edge profiles. These profiles may also be known as 'fluted' router bits. A trim bit on which one edgehas a curved radius.

Coves are used by professional installers to bridge the gap between the bottom of the wall and thefloor. A cove may also be used to form an inside corner. It may also be applied as a decorative profile.

Please ensure that you select a router bit with ashank (shaft) size that will fit your router. If are in doubt, contact us and wewill confirm if it will work for you.

Shank dia. (d) Radius (R) Cutting Length (B) 
12,7 mm (1/2") 7,9 mm (5/16") 15,9 mm (5/8 inch)
Cove dimensionsExplaining the Specifications:
  • (d) » The diameter of the shank or shaft. This size should be the same as the collet size of your router. Example: a small router is mostly supplied with a quarter inch collet that is 6,35 mm inside diameter.
  • (B) » The length of the cutting edge of the router bit
  • Common collet sizes:
    • 1/4' collet = 6,35mm inside diameter
    • 8mm collet = 8mm inside diameter
    • 12mm collet = 12mm inside diameter
    • 1/2' collet = 12,7mm inside diameter
    • Cove bit profile sampleNOTE that the 12mm and the 12,7mm (1/2') sizing are often misunderstood. 1/4 inch is not 6mm but exactly 6,35mm. A 6mm shank will not fit in a 1/4 in collet. Wrong sizes will either break the collet or the bit will fall out.
  • TCT = Tungsten Carbide Tipped
  • Allways stay in the MAX Speed range of router bit

 

Take CareFull Speed