Our Catalogue
Brands

RX-90 500ML RED OXIDE ANTI RUST PRIMER

RX-90 500ML RED OXIDE ANTI RUST PRIMER
Brand: ACTION CAN
Product Code: CAN32809
Availability: 58
Price: R350.69
Ex Tax: R304.95
Qty:     - OR -   Add to Wish List
Add to Compare
RX-90 - Red Oxide
Anti Rust Primer Spray

500ml Aerosol

RX-90 Red Oxide Anti-Rust Primer is a fast drying protective coating for useon all metal surfaces. The modified alkyd resin binder and anti-corrosion pigmentspresent protect against rust and provide an additional anti-corrosion layer forsubsequent topcoats. RX-90 exhibits strong adhesion on degreased, bare metal surfacesand is paintable with all one-component paints after 1 hour. RX-90 can be weldedthrough.

Application: Industrial MRO – structural steel, gantries, outside equipment and machinery.Agriculture – tank stands, fences, gates, animal raceways in milking sheds and yards,farm machinery and tractor drawbars. Trade/Pro-DIY – railings, roofing and spouting,gutters, outdoor fixtures, fences and gates.

Key Features

  • Protective anti-corrosion coating with zinc complexes to withstand harsh outdoor conditions
  • Primer for ferrous metals such as bare steel and iron surfaces
  • Excellent adhesion to rusty surfaces
  • Fast drying
  • Can be welded through
Application

Industrial MRO – structural steel, gantries, outside equipment and machinery. Agriculture – tank stands, fences, gates, animal raceways in milking sheds and yards, farm machinery and tractor drawbars. Trade/Pro-DIY – railings, roofing and spouting, gutters, outdoor fixtures, fences and gates.

Directions for use
  • Use in a well ventilated area.
  • Remove any rust and scale with a wire brush.
  • Ensure that the surface to be coated is clean, dry and free from grease.
  • RX-90 now has a “safety ring” under the button that must be levered out using a flat headed screwdriver.
  • RX-90 contains solids which settle during storage: shake the can vigorously until the agitator ball is free and continue shaking for a further minute.
  • Shake the can periodically during application.
  • Apply in light, even coats from approximately 20 cm - best results are obtained with 2 light coats rather than one heavy coat.
  • Additional coats can be applied after 15 - 20 minutes.
  • When spraying is finished, clean the aerosol valve by turning the can upside down and spray until only propellant escapes.
  • Do no use on energised equipment.

Technical Data:

Description Spec
APPEARANCE Dark red coating
ODOUR Solvent
RESIN TYPE Epoxy modified alkyd
TOUCH DRY 30 minutes
FULL CURED 16 hours
COVERAGE 1.5 to 2.0 m2 per can
DRY FILM THICKNESS Approximately 30 μm
MINIMUM APPLICATION TEMPERATURE 5°C
MAXIMUM TEMPERATURE RESISTANCE OF CURED FILM 110°C
PRODUCT SIZE 500ml Aerosol
MANUFACTURER CODE 1855