RX-90 500ML RED OXIDE ANTI RUST PRIMER

500ml Aerosol

RX-90 Red Oxide Anti-Rust Primer is a fast drying protective coating for useon all metal surfaces. The modified alkyd resin binder and anti-corrosion pigmentspresent protect against rust and provide an additional anti-corrosion layer forsubsequent topcoats. RX-90 exhibits strong adhesion on degreased, bare metal surfacesand is paintable with all one-component paints after 1 hour. RX-90 can be weldedthrough.

Application: Industrial MRO – structural steel, gantries, outside equipment and machinery.Agriculture – tank stands, fences, gates, animal raceways in milking sheds and yards,farm machinery and tractor drawbars. Trade/Pro-DIY – railings, roofing and spouting,gutters, outdoor fixtures, fences and gates.

Key Features

• Protective anti-corrosion coating with zinc complexes to withstand harsh outdoor conditions
• Primer for ferrous metals such as bare steel and iron surfaces
• Excellent adhesion to rusty surfaces
• Fast drying
• Can be welded through

Application

Industrial MRO – structural steel, gantries, outside equipment and machinery. Agriculture – tank stands, fences, gates, animal raceways in milking sheds and yards, farm machinery and tractor drawbars. Trade/Pro-DIY – railings, roofing and spouting, gutters, outdoor fixtures, fences and gates.

Directions for use

• Use in a well ventilated area.
• Remove any rust and scale with a wire brush.
• Ensure that the surface to be coated is clean, dry and free from grease.
• RX-90 now has a “safety ring” under the button that must be levered out using a flat headed screwdriver.
• RX-90 contains solids which settle during storage: shake the can vigorously until the agitator ball is free and continue shaking for a further minute.
• Shake the can periodically during application.
• Apply in light, even coats from approximately 20 cm - best results are obtained with 2 light coats rather than one heavy coat.
• Additional coats can be applied after 15 - 20 minutes.
• When spraying is finished, clean the aerosol valve by turning the can upside down and spray until only propellant escapes.
• Do no use on energised equipment.

Technical Data: