COVE ROUTER BIT WITH BEARING 1/2'X1/2'

Thisis an affordable router bit range that is well supported throughout South Africa. Allour Tork Craft router bits are Tungsten tipped. Tork Craft is a well-known BRANDin most retail stores.

At a glance:

½" Ø Shank router bit with a 7,9 mm (5/16") radius to profilea cove shape in wood.

Application:

This router bit is used with a plunge router to profile the edge of wood to producea concave edge that has a 7,9 mm (5/16") radius.

Definition: Cove Router Bits combine one or more concave radii (cove) toform many unique edge profiles. These profiles may also be known as 'fluted' router bits. A trim bit on which one edgehas a curved radius.

Coves are used by professional installers to bridge the gap between the bottom of the wall and thefloor. A cove may also be used to form an inside corner. It may also be applied as a decorative profile.

Please ensure that you select a router bit with ashank (shaft) size that will fit your router. If are in doubt, contact us and wewill confirm if it will work for you.

Explaining the Specifications:

• (d) » The diameter of the shank or shaft. This size should be the same as the collet size of your router. Example: a small router is mostly supplied with a quarter inch collet that is 6,35 mm inside diameter.
• (B) » The length of the cutting edge of the router bit
• Common collet sizes:
  • 1/4' collet = 6,35mm inside diameter
  • 8mm collet = 8mm inside diameter
  • 12mm collet = 12mm inside diameter
  • 1/2' collet = 12,7mm inside diameter
  • NOTE that the 12mm and the 12,7mm (1/2') sizing are often misunderstood. 1/4 inch is not 6mm but exactly 6,35mm. A 6mm shank will not fit in a 1/4 in collet. Wrong sizes will either break the collet or the bit will fall out.
• TCT = Tungsten Carbide Tipped
• Allways stay in the MAX Speed range of router bit