CORNER ROUND BIT 1/2'XR1/4'

Thisan affordable router bit range that is well supported throughout South Africa. Allour Tork Craft router bits are Tungsten tipped. Tork Craft is a well-known BRANDin most retail stores.

At a glance:

½" Ø Shank router bit with a 6,35mm (¼") radiusto profile a roundover shape in wood.

Application:

This router bit is used with a plunge router to profile the edge of wood to produce a rounded edge that has a 6,35mm radius

Definition: The basic edge-forming bit, the corner-rounding bit rounds an edge to a given radius.The tool is shouldered to cut a fillet. The cut can be used to ease edges, as asimple profile, or as a part of a complex one. Also known as roundover, roundingover, and quarter-round. If a smaller pilot bearing is used, a second shoulder canbe produced, in effect making the bit a beading bit.

Please ensure that you select a router bit with ashank (shaft) size that will fit your router. If are in doubt, contact us and wewill confirm if it will work for you.

Explaining the Specifications:

• (d) -> The diameter of the shank or shaft. This size should be the same as the collet size of your router. Example: a small router is mostly supplied with a quarter inch collet that is 6,35 mm inside diameter.
• Common collet sizes:
  • 1/4' collet = 6,35mm inside diameter
  • 8mm collet = 8mm inside diameter
  • 12mm collet = 12mm inside diameter
  • 1/2' collet = 12,7mm inside diameter
  • NOTE that the 12mm and the 12,7mm (1/2') are often misunderstood and 1/4 inch is not 6mm but exactly 6,35mm. A 6mm shank will not fit in a 1/4 in collet. You will either break the collet or the bit will fall out.
• (D) -> The actual width that the cutter will cut, groove, or profile.
• (B) -> The lenth of the cutting edge of the router bit
• (L) -> The total length of the router bit
• TCT = Tungsten Carbide Tipped
• Allways stay in the MAX Speed range of router bit