9' 230MM POLISHING BONNET WOOL

Diameter: Ø230mm

 Application:

The polishing wool buff should be used with an automotive polisher.Different polishes and waxes can be used with the buff. The buff is fastenedonto a rubber backing pad with laces. Make sure the diameter of the polishing buff isthe same as the backing pad's diameter.

It is necessary to polish a vehicle body panel when:

• The panel has been newly painted with a clear-coat.
• Shallow scratch marks need to be removed.
• The panel has suffered from oxidation.
• Swirl marks and hologram defects need to be removed.

TIP:
The buff is washable after use if the polishing compound is soluble.

Tie on polishing wool buff range:

Recommended polishing compounds to use:

• Liquid Shine™High cut - Features a silicone, wax and filler free polishingcompound to give a high gloss finish on fresh or cured paint. It is capableof removing P1500 grit sanding marks. It can be used on automotive paints,marine gel-coats and on composite surfaces.
• Liquid Shine™Fine cut - similar to the High cut polishing compound, but itis designed for use on a ceramic and scratch resistant clear-coat. It iscapable of removing P2000 scratch marks.
• Liquid Shine™Zero swirl - Very low abrasive for the final step of polishing.Removes holograms and swirl marks. Use a soft compounding sponge as a finalstep